The structure material of rotary dryer is heated evenly and easy to control. The motor is equipped with positive and reverse controller, temperature regulator, and can realized feeding and discharge from the same outlet. The machine adopts the horizontal structure of the drum, the drum is heated evenly and has the function of heat preservation, automatic rotation, automatic mixer, automatic discharge, the drum keeps rotating when working, so that the material up and down, left and right, front and back, three-dimensional mixing, will not appear sticky in the inner side of the machine phenomenon. Need to only press the positive and negative switch, the motor will drives the drum to reverse, the final material will out automatically, fast, easy and effortless, automatic temperature control device can realize automatic operation, heating efficiency is good.
1. The rotary dryer has strong overload resistance, large processing capacity, less fuel consumption, and low drying cost.
2. The operation parameters can be changed according to different material properties, so that the material can be heating completely.
3. The new feeding and discharging device,which to solve the problem of drum dryer feed blockage, discontinuity, uneven and return of materials and other phenomena, but also reduce the load of dust collection system.
4. The new inner wall structure strengthens the cleaning and heat conduction effect of dispersed materials, which solves the sticky phenomenon of the inner wall of the cylinder, and the adaptability of the material moisture and viscosity is also stronger.
5. The rotary dryer is designed for the initial moisture is not very high, the specific gravity is moderate, and the fluidity changes in the drying process. It has the advantages of compact structure, stable operation and less floor area, and is one half of the floor area of the same output single barrel drying equipment.
